Description
Quick Sense Innovations PIR Motion Sensor The Product is Energy Saving Device, it adopts good sensitivity detector, itegrated ckt. It gathers automatism, convenience, Safety,Saving energy ; physical functions. It works by receivging Human motion Infrared rays. Now Switch on/off your Lights, Bulb,CFL, etc by AUTOMATIC Use INFRARED PIR MOTION SENSOR Life: More than 5 years Use: Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area ; etc QUALITY CONTROL STANDARDS: Operating Volt: AC 220-250V 50Hz-60Hz. Load power: Upto 300/1200W Max Ambient Light: 3-2000 (Adjuestable) Load type: Incandescent lamp, LED light, CLF, fans, etc Detecting distance: 0~7M Detecting Angle: 360 Degree. Installtion Hight: 2.2-4 M Motion Detetion Speed: 0.6~1m/s Power Cusumption:0.1W (static) ; 0.4(Work) Working Humidity: less than 93%RH Delay: 10 Seconds -7 Minutes (Adjustable) PRODUCT INSTALLATION: 1.Keep Sensor unit 1.6 M higher from the ground level. 2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily. 3. Its on being fixed to the wire first time, the switch’ initialization will take 1-2 minutes. It’s natural for the switch to turn on/off voluntarily. 4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, ; then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
Reviews
There are no reviews yet.