API Liquid Aquarium Water Test Kit

Description

Test reads 0 to 4 mg/L or parts per million (ppm) of copper. Helps to maintain a healthy aquarium or pond for fish by ensuring that copper (a common treatment for many parisitic infections) levels are within the healthy range. Test kit of 90 tests.Importance of Testing for CopperCopper is often used to treat many parasitic infections on fresh and saltwater fish. To be effective, the copper concentration in the aquarium must be maintained at the therapeutic level for several weeks. Frequent testing is required to monitor the copper level in the aquarium. Some fish species are very sensitive to copper treatments. Therefore, follow the copper treatment manufacturer’s directions carefully.Copper should not be used or evident in aquariums with invertebrates, including snails, shrimp, crayfish and corals, as well as in freshwater aquariums or ponds with plants. Tap water may contain copper leached from pipes and, ultimately, it can accumulate in the aquarium.Testing TipsThe Copper Test Kit reads the total copper level in parts per million (ppm) which are equivalent to milligrams per liter (mg/L) from 0 ppm (mg/L) to 4.0 ppm (mg/L). The Copper Test Kit works in both freshwater and saltwater aquariums. The color chart provided with this test kit should be used to test for copper levels in fresh and saltwater aquariums and ponds.Directions for Testing Copper Levels: Read thoroughly before testing. Do not allow Test Solution to get into aquarium. To remove childproof safety cap: With one hand, push red tab left with thumb while unscrewing cap with free hand. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube). Add 10 drops of Copper Test Solution, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops added to the water sample. Cap the test tube and shake the tube for 5 seconds. Do not hold finger over the open end of the tube, as this may affect test results. Wait one minute for the color to develop.